Mercedes ECU Engine Computer Reprogramming.



Mercedes ECU Engine Computer Reprogramming. USED or NEW ECU it can be reprogram on bench. In this video I will show how to clone or how the clone service is done on Mercedes BOSCH ME 9.7 ecu.This ECU Engine computer has 3 data files 1 MPC
2 EXTFLASH and 3 eprom.
Common problem for these Mercedes ECU to Fail.
If your Mercedes sometime starts and runs good and sometime dont want to start at all check the fuel pump relay in the rear fuse box the ECU should give out ground when cranking if it dont the ecu is faulty.

If you need this service done you can click the link bellow

#ECU #Vehix411

Nguồn: https://svabc.org/

Xem thêm bài viết khác: https://svabc.org/game/
[relatemaed_posts_by_tax title=”Xem thêm Bài Viết:”]

35 Comments

  • Thank you so much, that is the most clear video about reprogramming the Mercedes ECU,

    hany mishrgy
    Posted July 11, 2020
  • can i not just use the backup and restore function

    James Stallwood
    Posted July 11, 2020
  • hey ,
    Thank you for ur videos can tell me which certificate or degree u have ??
    i want to learn this business can u guide me ?
    thank you in advance

    Made in Morocco
    Posted July 11, 2020
  • Most clearest videos

    Faizan Shaik
    Posted July 11, 2020
  • Thanks for provide very useful movie

    자유로 두더지
    Posted July 11, 2020
  • That's awesome thank you so much

    Dashty Fryad
    Posted July 11, 2020
  • How much does this setup cost
    Does all the software come with it
    Where do the files come from
    Can it delete dpf through software
    Mercedes gl350 bluetec

    Drew's Channel
    Posted July 11, 2020
  • I want a ecu service maker. Please need to help.

    Anik Roy
    Posted July 11, 2020
  • Hi

    Anik Roy
    Posted July 11, 2020
  • So u do this as well

    Joe Ruiz
    Posted July 11, 2020
  • Thank you so much,but i wonder how you could writing without select Restore and cancel Backup selection!

    Qaiss Abbas
    Posted July 11, 2020
  • Dear,

    I need to
    replace an ECU on 2008 Audi Q7 4.2 FSI, the engine control module is Bosch MED
    9.1.1.  Ktagl do the complete job? read & write?

    Jorge Trula
    Posted July 11, 2020
  • Hi. My ecu original is for sprinter dodge van 2008 mercedes benz bosch Germany . i buy used ecu with same id number A 642 150 97 78 of Mercedes Benz cl 320 ml 2008 by vin number . is posibble clone data of ecu sprinter a ml 320 mercedez?

    Media on Roads
    Posted July 11, 2020
  • I need your help, I want to buy K-tag or DIMSport Transdata, how can I talk to you, Thank you Mr.

    Juan Miguel Abreu
    Posted July 11, 2020
  • I need your help, I want to buy K-tag or DIMSport Transdata, how can I talk to you, Thank you Mr.

    Juan Miguel Abreu
    Posted July 11, 2020
  • How hard it’s to find or reprogramming a 07 dodge sprinter 2500 3.5 v6 gas , my mechanic has my van for almost a year and every time I called him , he said the computer he ordered was the wrong one , and the dealer don’t make computers for that van , and it makes it harder to find the one that fits A this point Idk what to do , any help or advice would be great

    Marco Gomez
    Posted July 11, 2020
  • Hi can you reprogram the scania truck with Kess alien tech ?

    Thanks for your job 🙂

    Geoffroy Gosselin
    Posted July 11, 2020
  • Hello, my Mercedes w202 C200 kompressor ECU has failed. I'm planning on to swap chip to new ECU. I've found new ECU, that differs from mine in only one field "HW', my ECU "HW" value is 48.99 and other is 39.97. Will that be a problem? I have also questions, what each field of this ECU means: "HM","HW","SW","Q01"?
    PS: ECU OEM number is A 028 545 78 32 and Bosch one is 0 261 206 570.

    Christian Yotov
    Posted July 11, 2020
  • Please send me your whatapp or Skype number

    Aspal Rawat
    Posted July 11, 2020
  • is it posible to add another key to the car …. my alfa needs the key to be done at factory and then the dealer tells the ecu to recognize it…….

    David Barrel
    Posted July 11, 2020
  • Hi on ktag if I clone a ecu for my car 2008 Mercedes C300 what option would I choose on the w204 would I go with the C300 2009 Bosch me 9.7 or would I choose something different

    jorge rodriguez
    Posted July 11, 2020
  • So this is for only Mercedes cars?
    Is there one of there that is universal for all cars?

    Mohammed Albayati
    Posted July 11, 2020
  • hi men thanks for u vidoe this programer u buy from ebay or is orgnial one?

    ALAN_UK
    Posted July 11, 2020
  • Wow this is some high-tech stuffs.

    WaiWaiSzeto
    Posted July 11, 2020
  • can you explan more information about 3 file. what do they work for?

    Hoàng Hiệp
    Posted July 11, 2020
  • The VIN on the computer from original didn't transfer to the new computer. is the Speedometer working on the car if you are able to start the car

    Ram M
    Posted July 11, 2020
  • Very good video friend. But there is no other way a little easier to do this ..?

    Fantasmaz Fantasmaz.z
    Posted July 11, 2020
  • Hello between k tag and kess which is good for a start if you want to buy one buy one

    Nelson Timah
    Posted July 11, 2020
  • I need the number of the capacitor

    Oscar luna merced
    Posted July 11, 2020
  • Is it possible to still rewrite ecu if the original has water damage?

    Prince Tabba
    Posted July 11, 2020
  • i'm trying to figure out the right adapter. which one are you using? (number14….)

    DVLZHAZE
    Posted July 11, 2020
  • Hello friends ! I have a question. I have changed on a R classe 320 cdi an Engine Ecu because the original was Dead… Now the car start normaly but impossible to change the gearbox position… STUCK on P position…what Do you think ? The car stays a long time without battery and maybe the auxiliary battery could be empty or I must code the Ecu of gearbox because the engine ecu has been changed ? Sorry my english I'm French 👍 Cheers Guys

    David Gofaster
    Posted July 11, 2020
  • Hi it can be used in Indian and Chinese vehicle

    Imthiyas Mohmmed
    Posted July 11, 2020
  • Do you have any experience with ECU programming for engine swaps on Mercedes platforms? W203 or W211

    Saffraz Mohammed
    Posted July 11, 2020
  • Thanks

    Why you did not write dirctly for new one why you read it and save it firest

    A93320336 A
    Posted July 11, 2020

Leave a comment