#Free #How to: FREE LS1 ECM Tuning.. Read and Write your ECM. FREE VATS REMOVAL

On your android device. Download LS Droid from the Website.
On your PC download Tuner Pro RT ( You do not need to register)
click on this link and join.

You will need to download their XDF files
(1999-2002 ECM are 512kb)
(2003-2007 ECMs are 1mb) keep that in mind when downloading the appropriate XDF files
Build a bench harness for your ecm,
Read your ecm with OBDLink LX or MX ( $50 on amazon)
Transmit the data from ur phone to pc. Open Tuner Pro, Select new XDF file. (which you should have already downloaded after registering with GearheadEFI)
The info on ur phone is saved as a BIN. Upload your bin..
Screw with the factory settings… Save BIn as..
Save new bin onto your phone. and Upload back onto ECM via Bluetooth
Its that easy..
The hardest part is mastering tuner pro.
The most expensive item for this project is the OBDlink Lx.

Nguồn: https://svabc.org/

Xem thêm bài viết khác: https://svabc.org/game/
[relatemaed_posts_by_tax title=”Xem thêm Bài Viết:”]


  • So I read my BIN and transferred it to my PC but I can't seem to find an XDF for BIN 12579405. I had read that the 2004 XDF/BIN 12587603 is a generic one that's compatible with almost all P59. When I try to flash my ECU with LS Droid it says that it isn't compatible with my ECU. Do you know of any BIN/XDF that is compatible? Sorry for the bothersome question since I'm still new to this.

    Frank Valdez
    Posted July 11, 2020
  • This seems like a pretty simple process. For $50 and a little bit of time to build the harness I'll try it out with a spare ECU that I have.

    Link the Duelist
    Posted July 11, 2020
  • Man i'v tried for nearly a month to get registered so I could download the xdf I need could you help me out. Iv got a 99 5.3 with 4l60e I'm trying to start in my blazer and I'm just not getting anywhere. I got my pcm copied with ls Droid just need the xdf.

    george davis
    Posted July 11, 2020
  • did you try this ecm out to see if it worked? have the oblink on the way to finish c4 ls swap

    Allen Ivy
    Posted July 11, 2020
  • What version of LS droid do you have? I am able to read the PCM but I cannot write onto the PCM because I don’t have the version that allows me to write.

    Josh Marmolejo
    Posted July 11, 2020
  • What if you just have a laptop woth bluetooth lol

    Posted July 11, 2020
  • Make sure your Bin and XDF match

    William Hagan
    Posted July 11, 2020
  • Nice I've used tuner pro for years for tpi. Waiting for my obd lx lol

    Posted July 11, 2020
  • I’ve seen another video on how to do this and it indicated the the operating system (xdf) should match the PCM OS number. If they are not the same, you may see some of your tables not populated properly. You may want to take another look at that bin in TunePro.

    Ron Hansen
    Posted July 11, 2020
  • Good job 50 bucks is worth it

    Larry Robert
    Posted July 11, 2020
  • I sub. No bs low budget advise! Keep up the real work man!

    Ronald Hagadorn
    Posted July 11, 2020
  • You might want check The Drivway Engineer site.

    Paul Pollack
    Posted July 11, 2020
  • Pretty cool.

    john coffman
    Posted July 11, 2020
  • Can you give us the link to the XPD file that you used from GEARHEAD to populate the TUNER PRO? I'm not clear on which one to use and the SERV # 12589462 so that I can use drive by cable instead of the DBW because I am using a 200 4R. And I have no idea what Im doing! But like everyone else I would like to try and give it a shot.

    Posted July 11, 2020
  • Great info. Thanks for sharing. Looks like a cheap way to get started. Doesn't it cost $75 to just get the Vats deleted by some tuners?

    Posted July 11, 2020
  • Cloning takes about 30 minutes

    kevin drury
    Posted July 11, 2020
  • Yeah buddy! 👍

    Jay Poe
    Posted July 11, 2020
  • Another easy way to figure stuff out is use hpt open a cammed tune file and put everything in respective formats(grams kpa etc) transfer to tuner pro and have a tune 95% of the way there it's nice having the free tuning capabilities but it's going to take a while to get a repository going

    Turbo Colorado
    Posted July 11, 2020
  • excellent,can't wait to dick around with my 2003 Tahoe 🙂

    bert visser
    Posted July 11, 2020
  • Now that’s cool

    TROUBL13_ 901
    Posted July 11, 2020

Leave a comment